In Wall Volume Control 300W Speaker Impedance Matching, Rotary Knob White SVC300

Description

OSD Audio's SVC300
is an impedance-matching volume control that lets you adjust the volume of a pair of speakers independently of other speakers within a whole house audio system. Ideal for areas such dining or conference rooms where you may want softer volumes or for saunas or garages where you may want higher volumes, the SVC300 maintains the full hi-fi audio frequency response with no low frequency roll-off. Equipped with the same features of volume controls that cost twice as much, the SVC300 is rated at 300 Watts peak and includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously. The impedance-matching feature helps stabilize the ohm load going back to the amp or receiver to avoid overheating and damaging expensive equipment. A complete volume control kit that fits into a standard single-gang box, the SVC300 also includes the junction box, screws and assorted color trim plates (white, ivory and almond) so you can choose the color that best matches the room. This versatile whole house volume control is compatible with almost any dedicated audio zone or whole house system, and the 12-step rotary knob adjusts the volume from inaudible to loud and everything in between.
Features:
Decora style impedance-matching volume control for whole house audio systems and dedicated audio zones
Rated at 150 Watts per channel with minimal bass roll-off
Impedance-matching feature stabilizes the ohm load so parallel connections of multiple volume controls can be installed without damaging the amplifier
Front-mounted adjustable jumpers allow easy adjustment when multiple pairs of speakers are connected to a single receiver or amplifier
Accepts up to 14-gauge wiring and fits in a standard gang box with a depth of 2.9'Includes junction box and screws as well as white, ivory and almond trim plates to match any room d'cor
Precision electronics provide low distortion and a ruler flat frequency response
12-step linear rotary-style knob for a wide range of listening volumes
Installs easily and works with almost any audio system
Specifications:
Volume Control Type: 300W Impedance Matching Rotary Knob Style
Power Handling: 300W Peak; 150W RMS Per Channel
Frequency Response: 20Hz - 20kHz
Total Attenuation: 52 dB (Max)
Steps: 12 (Make Before Break)
Impedance Matching for 1/2, 4, 6, or 8 Pairs of Speakers
*Can be Used as Non-Impedance Matching if Leaving Default on Jumper Setting at 1X
Wiring Requirement: Up to 14 Gauge Wire
Removable Input and Output "Quick Connect" Phoenix Connectors
Fits in a Standard Single Gang Box - See LV1 for Mounting Bracket
Unit Dimensions: (L x H x D) 1.62" x 2.5" x 2.5"
What's Included: White, Ivory and Almond Plates, Inserts, Screws, and Knob