Dual channel LED stereo music spectrum analyzer level meter 2*56 bits

Description

Dual channel LED stereo music spectrum analyzer level meter 2*56 bits with remote
Description
Function:
Function introduction:
VU56-Pro is a multi-functional stereo music peak level meter (PPM) display device that supports two-color (red+green). Each channel uses 56-bit LEDs, a total of 112 bits, high enough resolution, and accurate audio voltage. The scaled identification panel allows you to monitor the music level status in real time and manage your recording data conveniently. Every detailed music change, a variety of dynamic display effects, add more fun to your work and life!
Rich parameter settings, convenient remote control function, you can quickly set VU56-PRO to enter the best working state, all set parameters can be saved, the next time you turn on, no longer need to repeat settings, support linear RCA and 3.5 terminal input and output , It is convenient for you to connect the level timer, and it can also be output to other devices such as power amplifier or computer or recording settings at the same time... In addition, VU56-PRO also has a built-in MIC pickup module. Even if the audio cable is not connected, it can also happen through the monitor speaker. The rhythm of the sound beats.
All aluminum metal CNC shell, sturdy and durable, gold-plated RCA, 3.5 audio interface, to ensure the tightness of the connection, and effectively reduce impedance. Each group of RCA and 3.5 are connected in parallel. VU56-PRO only reads audio signals, but not Will change the audio signal.
Product parameters:
1 Input and output ports: RCA, 3.5MM Jack stereo each * 2 groups
2 Maximum audio input voltage: 5V (Exceeding this voltage may damage the level meter)
3 Maximum effective audio input voltage: 2.0V (the maximum voltage that can be measured, more than the full display)
4 Monitoring frequency range: 20~16Khz,
5 Display effect: 8 kinds. (Note that the value of the scale panel only supports the standard 1~3 display mode).
6 Support audio signal sources: computers, mobile phones, decoders, CDs, DVDs, players... (note: speaker output connected to power amplifiers is not supported).
7 Display brightness adjustment: support, a total of 4 levels.
8 Display color: 2 colors are optional, green/red.
9 Remote control function: support.
10 Display LED gain: 3 levels of gain adjustable (-3dB, 0dB, +3dB), (only adjust the display length, do not affect the source audio signal),
11 Main beam, peak point speed holding time setting: support
12 Saving power setting data: support
13 Signal source: LINE IN or microphone pickup
14 Power interface specification: Micro USB
15 Working voltage: DC 5V 1A at least..
16 Machine size: L*W*H
17 Weight:550g
Steps for usage:
1. VU56-PRO will automatically turn on when connected to the USB power cord (to turn off, press and hold the "SET" button on the rear panel for 3 seconds or you can turn off the power through the remote control power button).
2. Connect the output terminal of the player to the VU56-PRO through an RCA cable or a 3.5 audio cable. If you don’t want to connect an audio cable, you can select the MIC pickup mode through the "MIC/LINE" button on the back of the fuselage or the remote control. Through the speaker sound To control the LED bounce of the level meter.
3. Use the remote control or the "SET" button on the back of the fuselage to select the display effect type and more settings. It needs to be controlled by remote control.
4. After setting all the parameters, you can enjoy the fun that VU56-PRO brings to you.
Front panel function description:
In addition, under the display effect type of 1~3, the 0dB key can also turn on and off the level meter. The level meter will display red in the part where the scale exceeds 0dB. It is convenient for recording to monitor the level status. For example, the color of the main beam is green. When it is turned on, If the LED shows more than 0dB, all LEDs after 0dB will show red. Below 0dB, it will show green.
packing list:
1. 1X finished host
2. 1X remote control (without battery)) + manual
3. 1X Micro USB power cord (USB power adapter is not included, you need to bring your own)
If you have any questions, please contact us in time, we will help you deal with the problem for the first time.
Shipping
Item will be shipped within 24 -48 hours after full payment is received.
Normally the shippment to worldwide is used to take 15 to 30 business days, exclude Sat & Sun.
Payment
We accept PayPal only.
Payment must be received in 7 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in ebay note when you pay the order.
Any special request cannot be accepted after 24 hours of payment,because most of orders will be processed instantly and same day dispatched.
Contact Us
If you have any questions, please feel free to email our servicer ，and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact. If you haven't received item in 45 days, please contact us and we will arrange refund or resend
Feedback
We care about our valued buyers, if you have any questions, our Customer Service staffs will be very glad to help you. We try our best to reply your email as soon as possible, please kindly allow 24 hours(working day) for us to response. Thank you.
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without any contact.
On Jun-08-21 at 19:07:14 PDT, seller added the following information: