12 Gauge Shotgun Shell Crimp Cutter Tool For Wax Slugs, Version 2

Description

Using this tool you can cut open 12 Gauge birdshot shells quick and easy for reloading with wax slugs.
Blade is replaceable with a standard box cutter blade.
The blade can be moved up and down to change desired depth of cut
Tool is shipped assembled
Included in
Package:
1x 12 Ga Cutter Tool Main Body
1x 12 Ga Cutter Tool Blade Holder
1x Box Cutter Blade
2x 12 x 1-1/4 sheet metal screws
1x 10mm OD 6mm ID 2mm Width O-ring
NO SHOTGUN SHELLS ARE INCLUDED IN PACKADGE
Tool Use Instructions
1.Insert 12-gauge shell into the top hole until it contacts the blade
2.Gently rotate the shell clockwise while slowly pressing the shell deeper into the blade (Only a light touch is needed... if you use the tool like a gorilla the crimp will come out poorly)
3.Once the shell has bottomed out inside the tool, rotate the shell back counterclockwise one turn
4.Slowly remove the shell from the tool and dump the shot into a container
Instruction video: https://www.youtube.com/watch?v=UF3Neqq5qvc&ab_channel=NIMROD_NINJA
Tool Blade Replacement Instructions
1. Remove two screws from the body of the tool and separate the blade holder from the main body
2. Remove blade from main body
3. Flip blade over or select a new blade to use
4. Press blade back into the slot on the main body
6. Put the blade holder back on the main body and tighten the screws until snug